Alesis combo pedal board Informations De Garantie

- 3 - 

a) 

Read Instructions - All the safety and operating instructions should be read before this 
product is connected and used. 

b) 

Retain Instructions - The safety and operating instructions should be kept for future 
reference. 

c) 

Heed Warnings - All warnings on this product and in these operating instructions 
should be followed. 

d) 

Follow Instructions - All operating and other instructions should be followed. 

e) 

Placement – place the unit in a clean, dry location. 

f) 

Water and Moisture - This product should be kept away from direct contact with 
liquids. The apparatus shall not be exposed to dripping or splashing.  No objects filled 
with liquids, such as vases, shall be placed on the apparatus. 

g) 

Temperature- Avoid placing this product too close to any high heat sources such as 
radiators.  Do not use this unit at temperatures below 41

°F/5°C or above 95°F/35°C. 

h) 

Ventilation - The product should be situated so that its location or position does not 
interfere with its proper ventilation.  For example, the product should not be situated 
on a bed, sofa, rug, or similar surface that may block the ventilation opening  The 
product should not be placed in an installation, such as bookcase or cabinet, that may 
impede the flow of air through the product’s ventilation openings. 

i) 

Power Sources - This product should be connected to a power supply only of the type 
described in the operating instructions or marked on the unit. 

j) 

Power Cord Protection - Power supply cords should be routed so that they are not 
likely to be walked upon or pinched by items placed on or against them.  When 
removing the cord from a power outlet, be sure to remove it by holding the plug 
attachment and not by pulling on the cord. 

k) 

Object and Liquid Entry - Take care that objects do not fall into and that liquids are not 
spilled into the inside of the product. 

l) 

Cleaning – The appliance should be cleaned only as recommended by the 
manufacturer.  Do not use chemical solvents to clean the unit. 

m)  Non-use Periods – The power cord of the appliance should be unplugged from the 

outlet when left unused for long periods of time.  

n) 

Damage Requiring Service - Only qualified personnel should service this product.  If 
you have any questions about service please contact Alesis at the number(s) shown 
on the back cover of the manual. 

o) 

Grounding or Polarization - Precautions should be taken so that the grounding or 
polarization means built into the product is not defeated. 

p) 

Internal/External Voltage Selectors - Internal or external voltage selector switches, if 
any, should only be reset and re-equipped with a proper plug for alternative voltage by 
a qualified service technician. Do not attempt to alter this yourself. 

q) 

Carts and Stands －The appliance should be used only with a cart or 
stand that is recommended by the manufacturer of the cart or stand.     
An appliance and cart combination should be moved with care. Quick 
stops, excessive force, and uneven surfaces may cause the appliance 
and cart combination to overturn. 

 

- 4 - 

 
 
 

DANGER:  INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR 
DEFEATED.  AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR 
ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN 
HAZARDOUS RADIATION EXPOSURE. 

 
 
 
 
 

 

 
 
 
 
 
 

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to 
rain or moisture. Electrical equipment should NEVER be kept or stored in damp 
environments. 

 
 
 
 
 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY 

COVER.  NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL ONLY. 

The lightning flash with arrowhead symbol within the equilateral triangle is intended to 
alert the user to the presence of un-insulated “dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude to constitute a risk of electric shock. 

 

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN 

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES 

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.