EIKI LC-X4LA Mode D'Emploi
33
COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message “D. Zoom +” is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when input
image resolution is larger than panel resolution (1024 x 768).
A projected image can be also expanded by pressing D.ZOOM
and message “D. Zoom +” is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when input
image resolution is larger than panel resolution (1024 x 768).
A projected image can be also expanded by pressing D.ZOOM
▲
button on Remote Control Unit.
1
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
▲/▼, SELECT, POINT and AUTO PC ADJ. buttons.
▲/▼, SELECT, POINT and AUTO PC ADJ. buttons.
Move a red frame to function and press
SELECT button.
SELECT button.
Press POINT DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
function that you want to select and then press SELECT button.
2
Wide
Digital zoom +
NOTE
● Picture screen adjustment cannot be operated
when “720p (HDTV)”, “1035i (HDTV)”, “1080i50
(HDTV)” or “1080i60 (HDTV)” is selected on PC
SYSTEM Menu (P26).
(HDTV)” or “1080i60 (HDTV)” is selected on PC
SYSTEM Menu (P26).
● True and Digital zoom +/- cannot be selected when
“RGB”, “480p” or “575p” is selected on PC
SYSTEM Menu (P26).
SYSTEM Menu (P26).
● This projector cannot display any resolution higher
than 1600 X 1200. If your computer’s screen
resolution is higher than 1600 X 1200, reset
resolution to lower before connecting projector.
resolution is higher than 1600 X 1200, reset
resolution to lower before connecting projector.
● Input image data in other than XGA (1024 x 768) is
modified to fit original resolution size (1024 x 768)
in initial mode.
in initial mode.
● Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
is used.
Provides image to fit original resolution size (1024 x 768).
Normal
True
SCREEN MENU
SCREEN Menu icon
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message “D. Zoom –” is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
and message “D. Zoom –” is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
▼
button on Remote Control Unit.
Digital Zoom –
Provides image in its original resolution. When original image
resolution is larger than original resolution (1024 x 768), this
projector enters “Digital zoom +” mode automatically and the image
is compressed.
resolution is larger than original resolution (1024 x 768), this
projector enters “Digital zoom +” mode automatically and the image
is compressed.
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.