EIKI LC-XB22 Mode D'Emploi

Video Input

Press the MENU button to display the On-Screen Menu.
Press the Point

7 8

buttons to move the red frame pointer

to the Input Menu icon.

Press the Point

button to move the red arrow pointer to

Computer 1, and then press the SELECT button to display
the Source Select Menu.

Move the pointer to the correct input source and then press
the SELECT button.

Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.

Move the pointer to
Component or RGB (Scart)
and press the SELECT
button.

Input Menu

Input Menu icon

Computer 1

Video

Computer 2

COMPUTER button

Computer 1

Computer 2

INPUT button

Input Source Selection (Component, RGB Scart 21-Pin)

Direct Operation

Menu Operation

When the input source is coming from video
equipment connected to the COMPUTER IN 1/
COMPONENT IN terminal with a Component-
VGA Cable, select Component.

Component

When the input source is coming from video
equipment connected to the COMPUTER IN 1/
COMPONENT IN terminal with a Scart-VGA
Cable, select RGB (Scart).

RGB (Scart)

✔

Note:

• Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 58

for order.

• Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal

is used as Monitor out. (p41)

Choose Computer 1 by pressing the INPUT button on the top
control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.

✳ See Note at the bottom of this page.

✳

Computer

Source Select Menu (COMPUTER)