Sanyo PLC-XP200L Mode D'Emploi

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 

WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 78–79). If a computer is selected 

as a signal source, this projector automatically detects the signal format and tunes to project a proper image 

without any additional settings. (Some computers need to be set manually.) 

One of the following messages may appear when:

The projector cannot recognize the connected signal 

conforming to the provided PC Systems. The “Auto” is 

displayed on the System Menu box and the Auto PC 

Adjustment function works to display proper images. 

If the image is not projected properly, a manual 

adjustment is required. (pp. 40–41.)

There is no signal input from the computer. Check the 

connection between your computer and the projector. 

(See “Troubleshooting” on page 69.)

PC System Menu icon

Selected system is displayed.

Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 

PC System Menu icon.

Use the Point ed buttons to move the red arrow pointer to 

the desired system, and then press SELECT button. 

PC system can also be selected manually.

The preset system is manually adjusted in the PC 

Adjust Menu. The adjusted data can be stored in the 

Mode 1–10. (pp. 40-41)

PC systems provided in this projector is chosen. The 

projector chooses a proper system provided in the 

projector and displays it.

✽

 Mode 1 and SVGA 1 are examples.

PC System Menu icon 

Selected system is displayed

Systems in this dialog box can be 

selected.

Custom Mode (1–10) set in PC Adjust 

Menu. (pp.40–41)