Sanyo PLC-XP200L Mode D'Emploi

WARNING:  ● THIS APPARATUS MUST BE EARTHED .
 

●

  TO REDUCE THE RISK OF FIRE OR 

–  This  projector  produces  intense  light  from  the  projection 

lens.  Do  not  stare  directly  into  the  lens,  otherwise  eye 
damage could result. Be especially careful that children do 
not stare directly into the beam.

–  Install the projector in a proper position. Otherwise it may 

result in a fire hazard.

–  Allowing  the  proper  amount  of  space  on  the  top,  sides, 

and  rear  of  the  projector  cabinet  is  critical  for  proper  air 
circulation  and  cooling  of  the  unit. The  diagrams  shown 
here indicates the minimum space required. If the projector 
is  to  be  built  into  a  compartment  or  similarly  enclosed, 
these minimum distances  must be maintained.

–  Do  not  cover  the  ventilation  slots  on  the  projector.  Heat 

build-up  can  reduce  the  service  life  of  your  projector,  and 
can also be dangerous.

–  If the projector is unused for an extended time, unplug the 

projector from the power outlet.

–  Do  not  project  the  same  image  for  a  long  time. 

The  afterimage  may  remain  on  the  LCD  panels  by  the 
characteristic of panel.

When  hanging  the  projector  from  the 
ceiling,  clean  the  air  intake  vents  and  top 
of  the  projector  periodically  with  a  vacuum 
cleaner.  If  you  leave  the  projector  unclean 
for  a  long  time,  the  cooling  fans  can  be 
clogged  with  dust,  and  it  may  cause  a 
breakdown or a disaster.

THIS SYMBOL INDICATES THAT DANGEROUS 

VOLTAGE CONSTITUTING A RISK OF 

ELECTRIC SHOCK IS PRESENT WITHIN THIS 

UNIT.

THIS SYMBOL INDICATES THAT THERE 

ARE IMPORTANT OPERATING AND 

MAINTENANCE INSTRUCTIONS IN THE 

OWNER'S MANUAL WITH THIS UNIT.

Before installing and operating the projector, read this 

manual thoroughly.

The projector provides many convenient features and 

functions. Operating the projector properly enables 

you to manage those features and maintains it in good 

condition for many years to come.

Improper operation may result in not only shortening the 

product life, but also malfunctions, fire hazard, or other 

accidents.

If your projector seems to operate improperly, read this 

manual again, check operations and cable connections 

and try the solutions in the “Troubleshooting” section 

in the back of this manual. If the problem still persists, 

contact the dealer where you purchased the projector or 

the service center.

The symbol mark and recycling systems described below 

apply to EU countries and do not apply to countries in other 

areas of the world.

Your SANYO product is designed and manufactured with high 

quality materials and components which can be recycled 

and/or reused.

The symbol mark means that electrical and electronic equip-

ment, batteries and accumulators, at their end-of-life, should 

be disposed of separately from your household waste.
Note: 

If a chemical symbol is printed beneath the symbol mark, 

this chemical symbol means that the battery or accumulator 

contains a heavy metal at a certain concentration. This will be 

indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems 

for used electrical and electronic equipment, batteries and 

accumulators.

Please, dispose of them correctly at your local 

community waste collection/recycling centre.
Please, help us to conserve the environment 

we live in! 

1.5' (50 cm)

1.5' (50 cm)

1.5' (50 cm)

3' (1 m)

SIDE and TOP

REAR

Not for use in a computer room as defined in the 

Standard for the Protection of Electronic Computer/

Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle 

que définie dans la norme ANSI/NFPA 75 Standard for 

Protection of Electronic Computer/Data Processing 

Equipment.