Lexmark X850e Mode D'Emploi
Clearing ADF Jams
125
Clearing jams
7
Open the document cover, and remove any jammed pages.
8
Close the document cover.
9
Touch Continue.
293 Jam
A
293
jam indicates the MFP was sent a scan job, but found no original document in the ADF. To resolve a
293
Jam:
•
Touch Continue if no scan job is active when the attendance message appears. This clears the message.
•
Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and
clears the message.
clears the message.
•
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the
ADF immediately after the last successfully scanned page.
ADF immediately after the last successfully scanned page.
•
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the
last successfully scanned page.
last successfully scanned page.
•
Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully
scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or
FTP.
scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or
FTP.
•
Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job
containing the same parameters as the previous job starts.
containing the same parameters as the previous job starts.