Lexmark X850e Guide De Branchement
Media guide
Page 3 of 3
Page 3 of 3
•
Do not load wrinkled, creased, damp, or curled media.
•
Flex, fan, and straighten media before you load it.
•
Do not use media that has been cut or trimmed by hand.
•
Do not mix media sizes, weights, or types in the same media source.
•
Make sure the recommended print side is face down when loading 500-sheet trays, and face up when
loading the multipurpose feeder or the high capacity feeder, for simplex (single-sided) printing.
loading the multipurpose feeder or the high capacity feeder, for simplex (single-sided) printing.
•
Keep media stored in an acceptable environment. See “Storing Media.”
•
Do not remove trays during a print job.
•
Push all trays in firmly after loading them.
•
Make sure the guides in the trays are properly positioned for the size of media loaded. Make sure the guides
are not placed too tightly against the stack of media.
are not placed too tightly against the stack of media.
•
Make sure all cables that connect to the printer are correctly attached. See the Setup sheet for more
information.
information.
•
If a jam occurs, clear the entire media path. See the User’s Guide for information on the media path.