Linksys BEFVP41 Mode D'Emploi

EtherFast

®

Cable/DSL VPN Router with 4-Port 10/100 Switch

13

Instant Broadband

®

Series

12

4. Click the Properties button, and then choose the IP Address tab, as shown

in Figure 5-2. Select Obtain an IP address automatically. Click the OK
button. You have completed the client settings. 

5. Click the OK button. Windows may ask for original Windows installation

files. Supply them as needed (i.e.: D:\win98, D:\win95, D:\win9x, 
c:\windows\options\cabs).

6. Windows will ask you to restart the PC. Click the Yes button.

Chapter 5: Configuring Your

Network

You must now configure your other PCs to accept the IP addresses that the
VPN Router will provide. 

1. Click the Start button. Select Settings and open the Control Panel.

2. Double-click the Network icon.

3. In the Configuration window, shown in Figure 5-1, select the TCP/IP pro-

tocol line that has been associated with your network card/adapter. If there is
no TCP/IP line listed, go to “Appendix F: Installing the TCP/IP Protocol” to
install the TCP/IP protocol now.

Note: Make sure that a Network Card or Adapter has been successful-
ly installed into each PC on your network.

Note: These instructions apply only to Windows 95, Windows 98,
and Windows ME machines. For TCP/IP setup under Windows NT,
2000 and XP, please refer to your Windows manual.