Linksys WRV54G Manuel De Montage

A

Internet Configuration Type

Automatic Configuration - DHCP: If 

you are connecting through DHCP 

or a dynamic IP address from your 

ISP, keep this default setting.(D1)

Static IP: If your ISP assigns you a 

static IP address, select Static IP 

from the drop-down menu. Com-

plete the Internet IP Address, Sub-

net Mask,  Gateway, and DNS 

fields. You need to enter at least 

one DNS address. (D2)

PPPoE: If you are connecting 

through PPPoE, select PPPoE from 

the drop-down menu. Complete 

the User Name and Password 

fields. (D3)

PPTP: PPTP is a service used in 

Europe only. If you are using a PPTP 

connection, check with your ISP for 

the necessary setup informa-

tion.(D4)

E

When you are finished entering 

your Internet connection set-

tings, click the Save Settings 

button to save your changes. 

These instructions will show you how 

to configure the Router. You only 

need to configure the Router once 

using any computer you have set 

up.

A

Open your web browser. Enter 

http://192.168.1.1 in its Address 

field. Press the Enter key.

B

A password request screen will 

appear. Enter the default user 

name and password, admin, 

in lowercase letters in the User 

Name and Password fields. (For 

added security, you should 

later set a new password, using 

the Administration tab’s Man-

gagement screen of the web-

based utility). Then click the OK 

button.

C

The web-based utility will 

appear with the Setup tab 

selected. (See Figure C.) If 

requested by your ISP (usually 

cable ISPs), complete the Host 

Name and Domain Name 

fields, and the MTU and MTU 

Size fields. Otherwise, leave 

them blank.

D

For the Configuration Type set-

ting, four connections types 

are offered through the drop-

down menu. Each Setup 

screen and available features 

will differ depending on which 

connection type you select. 

F

3

M

Configure the Router

I

Wireless Channel. Select the 

appropriate channel from the 

list provided to correspond with 

your network settings. All 

devices in your wireless network 

must be broadcast on the 

same channel in order to func-

tion correctly. 

J

Wireless SSID Broadcast. When 

wireless clients survey the local 

area for wireless networks to 

associate with, they will detect 

the SSID broadcast by the 

Router. To broadcast the 

Router's SSID, keep the default 

setting, Enable. If you do not 

want to broadcast the Router's 

SSID, then select Disable.

K

Change these settings as 

described here and click the 

Save Settings button to apply 

your changes.

L

Restart your computer.

M

Test the setup by opening your 

web browser from any com-

puter and entering 

tration.

Congratulations! The installation of 

Wireless-G VPN Broadband Router is 

complete.

F

To configure the Router for your 

wireless network, select the 

Wireless Tab’s Basic Wireless 

Settings screen. (See Figure G.)

G

Select the Wireless Network 

Mode:

Mixed: If you have Wireless-G 

and 802.11b devices in your 

network, then keep the default 

setting, Mixed.

G-Only: If you have only Wire-

less-G devices, select G-Only.

B-Only: If you have only Wire-

less-G devices, select B-Only.

Disable: If you want to disable 

wireless networking, select Dis-

able.

H

Wireless Network Name (SSID). 

The SSID is the network name 

shared among all points in a 

wireless network. The SSID must 

be identical for all points in the 

wireless network. It is case-sen-

sitive and must not exceed 32 

characters (use any of the 

characters on the keyboard). 

Make sure this setting is the 

same for all points in your wire-

less network. For added secu-

rity, you should change the 

default SSID (linksys) to a 

unique name.

WRV54G-QI-30801NC-BW

C

For additional information or troubleshooting 
help, refer to the User Guide on the Setup CD-
ROM. You can also call or email for further 
support.

800-326-7114 
(toll-free from US or Canada)

support@linksys.com

http://www.linksys.com   or

http://support.linksys.com

http://www.linksys.com/support

ftp://ftp.linksys.com

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of 
Cisco Systems, Inc. and/or its affiliates in the U.S. 
and certain other countries. Copyright © 2003 
Cisco Systems, Inc. All rights reserved.

Quick Installation

Model No.

Quick Installation

 For more advanced set-

tings and security options, refer to 
the User Guide on the  Setup Wiz-
ard CD-ROM.

D

1

D

2

D

3

D

4