Manualsbrain.com
  1. Manuels
  2. Marques
  3. Ritron
  4. j-u410
  5. Mode D'Emploi

Ritron j-u410 Mode D'Emploi

Télécharger
Page de 32
3 Section 
1 
Getting Started 
 
1.3 
Paging the Loudmouth
™
 receiver and PA speaker
 
The Loudmouth
™
 receiver and PA speaker can be paged with 2-way radios programmed for Quiet Call (CTCSS), 
Digital Quiet Call (DCS), 2-Tone Paging, or Selcall paging formats.  Each format offers a unique method of paging 
the Loudmouth
™
 receiver and PA speaker.   
Refer to the Programming section of this manual for specific instructions on programming your Loudmouth
™
 
receiver and PA speaker to one of these selective signaling formats. 
 
Ritron strongly recommends operation of the Loudmouth
™
 receiver and PA 
speaker with one of the following selective signaling formats enabled. 
 
Paging the Loudmouth
™
 with Quiet Call (CTCSS) only: 
• 
To page the loudspeaker a user simply presses the 2-way radio’s PTT and speaks while on the 
Loudmouth
™ 
channel. 
• 
Your 2-way radio must be programmed for a channel dedicated to Loudmouth
™ 
operation.  Only those 
radios programmed with the Loudmouth
™ 
channel will be able to access the loudspeaker. 
• 
The 2-way radio’s Loudmouth
™ 
channel and the Loudmouth
™ 
receiver must be programmed for the 
same QC code.  All Ritron radios offer 50 different field-programmable QC codes from which to choose. 
 
Paging the Loudmouth
™
 with Digital Quiet Call (DCS) only: 
• 
To page the loudspeaker a user simply presses the 2-way radio’s PTT and speaks while on the 
Loudmouth
™ 
channel. 
• 
Your 2-way radio must be programmed for a channel dedicated to Loudmouth
™ 
operation.  Only those 
radios programmed with the Loudmouth
™ 
channel will be able to access the loudspeaker. 
• 
The 2-way radio’s Loudmouth
™ 
channel and the Loudmouth
™ 
receiver must be programmed for the 
same DQC code.  All Ritron radios offer 104 different field-programmable DQC codes from which to 
choose. 
 
Paging the Loudmouth
™
 with 2-Tone Paging: 
• 
To page the Loudmouth
™ 
the 2-way radio must first send the correct 2-Tone Paging code.  Once 
access to the loudspeaker is accomplished, the user simply presses the 2-way radio’s PTT and speaks 
while on the Loudmouth
™ 
channel.  After a period of inactivity the Loudmouth
™ 
is automatically reset, 
and will then require the correct 2-Tone Paging code to re-gain access. 
• 
Only 2-way radios programmed to send the correct 2-Tone code on the Loudmouth
™
 channel can 
access the Loudmouth
™
 wireless PA speaker.  However, once access is gained, any 2-way radio that 
operates on the Loudmouth
™
 channel can access the loudspeaker up until the time that the 
Loudmouth
™
 has automatically reset. 
• 
Can be used in conjunction with QC or DQC for added security.  The 2-way radio and the Loudmouth
™ 
receiver must be programmed for the same QC or DQC code.    
 
Paging the Loudmouth
™
 with Selcall: 
• 
To page the Loudmouth
™ 
the 2-way radio must be programmed to send the correct Selcall code every 
time the PTT is pressed.  The user simply presses the 2-way radio’s PTT and speaks while on the 
Loudmouth
™ 
channel.   
• 
Only 2-way radios programmed to send the correct Selcall code on the Loudmouth
™
 channel can 
access the Loudmouth
™
 wireless PA speaker.  
• 
Can be used in conjunction with QC or DQC for added security.  The 2-way radio and the Loudmouth
™ 
receiver must be programmed for the same QC or DQC code.