TallyGenicom 2365 Mode D'Emploi
Advanced menu
User guide
108
Serial number (SerialN)
With the SerialN function you have the possibility to change the
10 digit serial number of the printer. The number can be written with
any ASCII character between hex 20 and hex 7E.
10 digit serial number of the printer. The number can be written with
any ASCII character between hex 20 and hex 7E.
Select the SerialN (2) menu.
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Default setting:
Default setting:
factory set
To change a digit select one character with the > or < key and press
the Set (1) key. Press < or > key to decrement or increment the se-
lected character. When the desired character appears press Set (1)
key and the new character is stored.
the Set (1) key. Press < or > key to decrement or increment the se-
lected character. When the desired character appears press Set (1)
key and the new character is stored.
After you have changed all desired digits leave the menu by press-
ing the Exit (4) key.
ing the Exit (4) key.
This setting is not reset by loading the default factory settings.
Asset number (AssetN)
With the AssetN function you have the possibility to change the
10 digit asset number of the printer. The number can be written with
any ASCII character between hex 20 and hex 7E.
10 digit asset number of the printer. The number can be written with
any ASCII character between hex 20 and hex 7E.
Select the AssetN (3) menu.
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Default setting:
Default setting:
factory set
To change a digit select one character with the > or < key and press
the Set (1) key. Press < or > key to decrement or increment the se-
lected character. When the desired character appears press Set (1)
key and the new character is stored.
the Set (1) key. Press < or > key to decrement or increment the se-
lected character. When the desired character appears press Set (1)
key and the new character is stored.
After you have changed all desired digits leave the menu by press-
ing the Exit (4) key.
ing the Exit (4) key.
This setting is not reset by loading the default factory settings.