TallyGenicom 2365 Mode D'Emploi
User guide
The Menu
63
Skiping perforation (Skip)
Skips the perforation; 7 different values (in inches) can be defined.
Press Skip (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Default Setting: 0.0 Inch
Default Setting: 0.0 Inch
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
(4) to access the next group of parameters.
Selecting start signal for
escape sequence
(ESCChar)
escape sequence
(ESCChar)
Selects the start signal for control sequences. Setting ESC: Only
character Escape can be used. Setting ESC+$$: Character Escape
or alternatively two $ characters ($$) can be used. For more infor-
mation see the section
character Escape can be used. Setting ESC+$$: Character Escape
or alternatively two $ characters ($$) can be used. For more infor-
mation see the section
Press ESCChar (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: ESC/ESC+$$
Default Setting: ESC
Default Setting: ESC
Confirm the setting by pressing the Set key (1).
LPI
Skip
Online
Setup
2
1
3
4
Back
Next
Skip= 0.0 Inch *
Online
Setup
Set
<
>
Exit
2
1
3
4
ESCChar
Emulate
Online
Setup
2
1
3
4
Back
Next
ESCChar=ESC
*
Online
Setup
Set
<
>
Exit
2
1
3
4