Funai dv-220sl8 Mode D'Emploi

– 4 –

EN

•  Do not stand this unit up vertically. Install this unit in a 

horizontal and stable position. Do not place anything directly on top 
of this unit. Do not place this unit directly on top of the TV.

•  Depending on the TV, noise or disturbance of the picture and/or 

sound may be generated if this unit is placed too close to your TV. In 
this case, please ensure enough space between your TV and this unit.

•  Do not cover or place this unit in enclosed spaces to 

prevent excessive temperature build up.

•  Do not place this unit in direct sunlight, or near heat sources.
•  Depending on the environment, the temperature of this unit may 

increase slightly. This is not a malfunction.

•  Keep this unit away from strong magnetic objects.
•  Do not place any object containing water or other liquids on this 

unit. In the event that liquid should enter the cabinet, unplug this 
unit immediately and contact the retailer or an authorized service 
center immediately.

•  Do not remove this unit cabinet. Touching parts inside the cabinet 

could result in electric shock and/or damage to this unit. For service 
and adjustment inside the cabinet, call a qualified dealer or an 
authorized service center.

•  Be sure to remove disc and cassette tape and unplug the AC power 

cord from the output before carrying this unit. 

•  Do not handle the power cord with wet hands.
•  Do not pull on the power cord when disconnecting it from AC 

outlet. Grasp it by the plug.

•  If, by accident, water is spilled on this unit, unplug the power cord 

immediately and take the unit to our authorized service center for 
servicing.

•  Do not put your fingers or objects into the unit cassette holder.

Moisture may form inside this unit under the following conditions:
•  Immediately after a heater is turned on.
•  In a steamy or humid room.
•  When this unit is suddenly moved from a cold to warm environment.
If moisture forms inside this unit, it may not operate properly or 
damage the cassette tape. In such case, do not use this unit at least for 
2 hours until its inside gets dry.

Unauthorized copying, broadcasting, public performance and lending 
of discs are prohibited. 
This product incorporates copyright protection technology that is 
protected by U.S. patents and other intellectual property rights. Use of 
this copyright protection technology must be authorized by Macrovi-
sion, and is intended for home and other limited viewing uses only 
unless otherwise authorized by Macrovision. Reverse engineering or 
disassembly is prohibited.

Consumers should note that not all high definition television sets 
are fully compatible with this product and may cause artifacts 
to be displayed in the picture. In case of picture problems with 
525 progressive scan output, it is recommended that the user 
switch the connection to the ‘standard definition’ output. If 
there are questions regarding your TV set compatibility with this 
525p DVD player, please contact our customer service center.

The following symbols appear in some headings in this manual.

 :  Description refers to video cassette tapes.

 :  Description refers to DVD-video.

 :  Description refers to audio CD.

 :  Description refers to CD-RW/-R with MP3 files.

•  This reminder is provided to call the CATV system installer’s attention to 

Article 820-40 of the NEC that provides guidelines for proper grounding 
and, in particular, specifies that the cable ground should be connected 
to the grounding system of the building, as close to the point of cable 
entry as practical.

• Remember to read the instructions along with the video head cleaner 

before use.

• Clean video heads only when problems occur.

•  Please refer to relevant topics on the “Troubleshooting Guide” on 

page 23 before returning the product. 

•  If this unit becomes inoperative, do not try to correct the problem 

by yourself. There are no user-serviceable parts inside. Turn off, 
unplug the power plug, and please call our toll free customer 
support line found on the cover of this manual to locate an autho-
rized service center.

•  Use a soft cloth slightly moistened with a mild detergent solution. 

Do not use a solution containing alcohol, spirits, ammonia or 
abrasive.

•  When a disc becomes dirty, clean it with a cleaning cloth. Wipe the 

disc from the center to out. Do not wipe in a 
circular motion.

•  Do not use solvents such as benzine, thinner, commercially available 

cleaners, detergent, abrasive cleaning agents or antistatic spray 
intended for analog records.

•  If this unit continues to perform improperly even after you have 

referred to the relevant sections and to the 
“Troubleshooting Guide” in this manual, the laser optical pickup unit 
may be dirty. Consult your dealer or an authorized service center for 
inspection and cleaning of the laser optical pickup unit.

•  When you handle a disc, hold it by its edge and try not to touch the 

surface of the disc.

•  Always store the disc in its protective case when not in use.

•  Automatically cleans video heads as you insert or remove a cassette 

tape, so you can see a clear picture.

•  Playback picture may become blurred or interrupted while the TV 

program reception is clear. Dirt accumulated on the video heads 
after a long period of use, or the usage of rental or worn cassette 
tapes can cause this problem. If a streaky or snowy picture appears 
during playback, the video heads in your unit may need to be 
cleaned.
1.  Please visit your local audio/video store and purchase a good 

quality VHS video head cleaner.

2.  If a Video head cleaner does not solve the problem, please call our 

toll free customer support line found on the cover of this manual to 
locate an authorized service center.

Manufactured under license from 
Dolby Laboratories. “Dolby” and the 
double-D symbol are trademarks of Dolby 
Laboratories.

© 2007 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, 
transmitted, disseminated, transcribed, downloaded or stored in any 
storage medium, in any form or for any purpose without the express pri-
or written consent of Funai. Furthermore, any unauthorized commercial 
distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. 
Funai reserves the right to change the content herein without the 
obligation to notify any person or organization of such changes.

 with the 

 design is a registered trademark of Funai 

Electric Co., Ltd and may not be used in any way without the express 
written consent of Funai. All other trademarks used herein remain 
the exclusive property of their respective owners. Nothing contained 
in this manual should be construed as granting, by implication or 
otherwise, any license or right to use any of the trademarks displayed 
herein. Misuse of any trademarks or any other content in this manual 
is strictly prohibited. Funai shall aggressively enforce its intellectual 
property rights to the fullest extent of the law.