Lexmark X952dte Mode D'Emploi
3
Set the COM port parameters:
After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.
Note: Make sure the serial parameters in the COM port match the serial parameters you set in the printer.
a
Open the Device Manager.
1
Click
, or click Start and then click Run.
2
In the Start Search or Run box, type devmgmt.msc.
3
Press Enter, or click OK.
b
Look for Ports, and then click + to expand the list of available ports.
c
Right
‑click the COM port where you attached the serial cable to your computer (example: COM1).
d
Click Properties.
e
On the Port Settings tab, set the serial parameters to the same serial parameters in the printer.
Check the serial heading of the menu settings page for the printer settings.
Check the serial heading of the menu settings page for the printer settings.
f
Click OK, and then close all the windows.
g
Print a test page to verify printer installation.
Additional printer setup
65