Lexmark X952dte Mode D'Emploi
4
Push the paper pick tab, and then load the paper or specialty media. Slide the stack gently into the multipurpose
feeder until it comes to a stop, and then release the paper pick tab.
feeder until it comes to a stop, and then release the paper pick tab.
Warning—Potential Damage: Pulling the paper out, without pushing the paper pick tab first, may cause jams or
the paper pick tab to break.
the paper pick tab to break.
•
Load paper and transparencies with the recommended print side facedown and the short edge entering the
printer first.
printer first.
•
For duplex letterhead printing, place the letterhead faceup and the header entering the printer last.
•
Load envelopes with the flap side up and to the right.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self
self
‑stick adhesives. These envelopes may severely damage the printer.
Notes:
•
Do not exceed the maximum stack height by forcing paper or transparencies under the stack height limiter.
•
Load only one size and type of paper at a time.
Loading paper and specialty media
81