Lorex sg620r Fascicule
FEATURES
• Excellent Economical Deterrent
• Flashing Indicator Light Provides Real
Authentic Look*
• Flashing Indicator Light Provides Real
Authentic Look*
* Flashing indicator light function requires 2 x ”C” type batteries.
Not included.
Not included.
THIS PACKAGE CONTAINS:
1 x Dummy Camera
1 x Ceiling Mount Bracket
1 x Screw and Anchor Pack
1 x Ceiling Mount Bracket
1 x Screw and Anchor Pack
INSTALLING BATTERIES
Ceiling Mount Bracket
1. Remove the four (4) black Holding screws
from the Dome Cover, and remove the cover.
from the Dome Cover, and remove the cover.
The Simulated Security Camera requires two “C” batteries (not supplied) if using the flashing red LED. The dome is also effective without
the flashing LED as some models of actual Security Cameras do not have a flashing LED.
the flashing LED as some models of actual Security Cameras do not have a flashing LED.
Cautions:
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different
capacities
• Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different
capacities
2. Remove the two (2) silver screws holding the
Simulated Lens to the Base. Remove the Lens
component to access the Battery Compartment.
Simulated Lens to the Base. Remove the Lens
component to access the Battery Compartment.
MODEL SG620R
Simulated (Dummy) Security Camera
Screw & Anchor Pack
Dummy Camera
The Lorex Simulated Security Dome Camera is an affordable and effective theft deterrent device. It looks like a real surveillance camera with
its flashing red indicator, imitation lens and dome construction. Mount the simulated security camera in a visible area on a ceiling or wall to
deter possible thieves and intruders.
its flashing red indicator, imitation lens and dome construction. Mount the simulated security camera in a visible area on a ceiling or wall to
deter possible thieves and intruders.
NOTE: The simulated security screws are for
show only, and are not removable.
show only, and are not removable.
3. Place the batteries in the compartment as
indicated by the polarity symbols(+ and -)
marked inside.
indicated by the polarity symbols(+ and -)
marked inside.
1.
2.
3.
4. Reattach the Lens Compartment to the
base with the two (2) silver screws. Set the
switch to ON to start the RED LED blinking.
Replace the Dome Cover, and secure with the
four (4) black screws.
base with the two (2) silver screws. Set the
switch to ON to start the RED LED blinking.
Replace the Dome Cover, and secure with the
four (4) black screws.
4.
NOTE: Fresh batteries will power the
simulated security camera’s indicator for
about 4 months (if the flashing LED is left
on continuously).
simulated security camera’s indicator for
about 4 months (if the flashing LED is left
on continuously).
When the indicator dims or stops
flashing, replace the batteries
flashing, replace the batteries