Audiovox avp-8380t Mode D’Emploi

1 Press the A.MEMORY button to display and start the Auto Channel Searchs. The VCP begins

scanning for channels available in the area.

2 When scanning is complete, the VCP tunes to the lowest channel available.
3 After completing Auto Channel Search, pressing the CH + or - buttons should only select active channels.

You might want to add or remove channels after using Auto Channel Search, especially if there are weak
signals or channels with content you don't care for.
1 Press the ADD/REM button to display the ADD/REMOVE CHANNELS.
2 To go to the channel you want to add or remove, use the CH + or - button or enter a specific channel

number using the number buttons.

3 Once the desired channel is displayed, the on-screen menu will tell you if the

channel is currently in the VCP's viewing list.
Press the ADD/REM button to add or remove a channel from the available
channels list.

4 Once finished adding/deleting channels, press the EXIT button to exit the

menus.

Note : To view active channels, use the remote control's CH+ and- buttons. You
can also access channels not available in the active channel list by using the
remote control's number buttons to enter the specific channel number.