Cisco e2100l Manuel D’Utilisation
Linksys E2100L
Appendix A: Troubleshooting
42
Advanced Wireless-N Router
2 . On your desktop, double-click Computer or My
Computer icon .
3 . Right-click the USB storage device, and click
Properties .
4 . The format is listed in the File system
description . If the format is not NTFS or FAT, then
back up the data on the USB storage device .
back up the data on the USB storage device .
After you have backed up the data on the USB storage
drive, you can format it . Right-click the USB storage
device, and click Format . Follow the on-screen
instructions . For more information, refer to Windows
Help .
If the Router still does not recognize the USB storage
device, then remove the power adapter from the Router’s
Power port . Wait five seconds, and then re-connect the
power adapter to the Router’s Power port .
device, then remove the power adapter from the Router’s
Power port . Wait five seconds, and then re-connect the
power adapter to the Router’s Power port .
In Windows Vista, you do not see the USB storage device
in the Network screen.
in the Network screen.
Make sure the Router and your computer use the same
workgroup name . (The default workgroup name of the
Router is workgroup . In Windows Vista, right-click the
Computer icon and select Properties . Click Advanced
system settings . Click the Computer Name tab . The
workgroup name is displayed .) If they differ, then
change the workgroup name of the Router . Follow these
instructions:
workgroup name . (The default workgroup name of the
Router is workgroup . In Windows Vista, right-click the
Computer icon and select Properties . Click Advanced
system settings . Click the Computer Name tab . The
workgroup name is displayed .) If they differ, then
change the workgroup name of the Router . Follow these
instructions:
1 . Access the web-based utility of the Router . (Refer to
2 . Click the Storage tab .
3 . Click the Administration tab .
4 . In the Workgroup Name field, enter the workgroup
3 . Click the Administration tab .
4 . In the Workgroup Name field, enter the workgroup
name of your computer .
5 . Click Save Settings .
In Windows XP, you do not see the Router in the My
Network Places screen.
Network Places screen.
In the Network Tasks section, click Show icons for
networked UPnP devices . If the Router does not appear,
follow these instructions:
networked UPnP devices . If the Router does not appear,
follow these instructions:
1 . Go to Start > Control Panel > Firewall .
2 . Click the Exceptions tab .
3 . Select UPnP Framework .
4 . Click OK .
2 . Click the Exceptions tab .
3 . Select UPnP Framework .
4 . Click OK .
In Windows XP, you do not see your USB storage device
in the View workgroup computers screen.
in the View workgroup computers screen.
Make sure the Router and your computer use the same
workgroup name . (The default workgroup name of
the Router is workgroup . In Windows XP, go to Start >
Control Panel > System . Click the Computer Name tab .
The workgroup name is displayed .) If they differ, then
workgroup name . (The default workgroup name of
the Router is workgroup . In Windows XP, go to Start >
Control Panel > System . Click the Computer Name tab .
The workgroup name is displayed .) If they differ, then
change the workgroup name of the Router . Follow these
instructions:
instructions:
1 . Access the web-based utility of the Router . (Refer to
2 . Click the Storage tab .
3 . Click the Administration tab .
4 . In the Workgroup Name field, enter the workgroup
3 . Click the Administration tab .
4 . In the Workgroup Name field, enter the workgroup
name of your computer .
5 . Click Save Settings .
WEB:
If your questions are not addressed
here, refer to our E2100L section on the web,
www.linksys.com/support/E2100L
www.linksys.com/support/E2100L