Audiovox CDM-9500 Mode D’Emploi

Chapter 9

Sets the mode for receiving async data calls up to 14.4 kbps.

1. Press 

 

 

.

2. Select “Off”, “Data” or “Data Once” then press 

.

♦ Off: Does not receive data call.

♦ Data: Receives data calls while the phone is on.

♦ Data Once: Receives one data call.

When “Data” or “Data Once” is selected, “Data” will appear on the
display.

Note:1. After receiving one data call or after 10 minutes, “Data Once” will

automatically be reset to “Off”.

2. Voice calls cannot be received when Data mode is set.

3. Data Service (F52) is automatically set to “Circuit” when the

Data Mode (F53) is set to Data.

4. When your phone is working in Data mode, you can only use

.

5. Data Mode (F53) cannot be set if TTY mode is active.

6. To send async data, the Data Mode (F53) setting is not neces-

sary. Data Service (F52) must be set to “Circuit” to send async

data.

To access Internet (Packet)

(Off)

To access Internet (QNC)

N/A

To receive async data

(Circuit)

To send async data

N/A

To make or answer voice calls

N/A