Audiovox ce240 Mode D’Emploi

You can power your portable stereo system by plugging the detacha-
ble AC power cord into the AC inlet on the back of the unit and into a
wall AC power outlet.
Check that the rated voltage of your unit matches your local voltage.
Make sure that the AC power cord is fully inserted into the unit.
Caution: (for USA)
To prevent electrical shock, match
wide blade of plug to wide slot,
fully insert.
Note:

When not being used on mains the

AC Cord should be unplugged

from the unit.

You can listen to your favourite radio stations by sliding the FUNCTION
switch to RADIO, and then

1. Slide the BAND switch to choose AM(MW) or FM.
2. Using the TUNING control to choose a desired station.

•   Adjust the VOLUME.

• Repositioning the unit to get better AM(MW)/FM reception.

Insert 6 "C" size batteries in the battery compartment. Be sure that the
batteries are inserted correctly to avoid damage to the unit.
• Always remove the batteries when unit will not be used for a long

period of time, as this will cause leakage of the batteries and
subsequently damage to your unit.

• Playback will automatically come to a stop when the batteries have

no more power. Replace all the batteries with new ones.

• Do not mix old and new batteries. Do not mix ALKALINE, standard

(CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.

Note
When you have finished listening, slide the FUNCTION switch to OFF.

Adjust the VOLUME control of the stereo system to a desired level.

For private listening
Connect headphones (Ø  3.5 mm stereo mini-plug) to the PHONES      jack.
When only headphones are connected the speakers are automatically
disconnected.

1. Slide the FUNCTION switch to CD. "

" is shown in the display.

2. Open the CD door. Place a disc in the centre with the label side

up and then close the CD door gently. The total number of tracks
will show in the display.

3. Press the  PLAY/PAUSE 

 button to start play. The PLAY  " "

indicator will light.

• Adjust the  VOLUME.

TO STOP PLAYBACK
• Press the CD STOP   button to stop disc play.

TO INTERRUPT PLAYBACK
• Press the PLAY/PAUSE 

 button while a CD is playing to pause

play (the PAUSE " " indicator will blink).

• Press the PLAY/PAUSE 

 button again to resume play.

TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the SKIP   or   button according to the desired

direction. Each press skips one track. During play, the first press on
the skip backwards   button to the beginning of the current track.

• Playback resumes from the selected track.

TO SEARCH THROUGH TRACKS
• Keep either one of the SKIP   or 

 button pressed, according to

the desired direction, and release at the desired point.

This function allows one track or all tracks on a disc to be played repeatedly.

TO REPEAT THE SAME TRACK
• Press the REPEAT button once during playback, the REPEAT ONE

" " indicator will blink.

TO REPEAT THE WHOLE DISC
• Press the  REPEAT button a second time to repeat all tracks, the

REPEAT ALL " " indicator will light.

TO CANCEL REPEAT PLAY
• Press the REPEAT button until the REPEAT indicator is turned off.

Note
Repeat play can only be done when the unit is in the play mode.

13. CD display

14. BAND switch
15. AC socket
16. Battery compartment

Play " " indicator
Pause " " indicator
Repeat all " " indicator
Repeat one " " indicator

Track number

1. Handle
2. CD door
3. STOP   button
4. PLAY / PAUSE 

 button

5. FUNCTION switch
6. VOLUME control
7. PHONES    jack
8. Fixed antenna
9. Tuning control
10. SKIP 

 button

11. REPEAT

 button

12. SKIP 

 button

To AC inlet

To wall AC outlet