Alcatel-Lucent 6850-48 Guide De Référence
IPX Commands
page 38-16
OmniSwitch CLI Reference Guide
September 2009
ipx filter gns
Creates/deletes an IPX Get Next Server (GNS) filter. GNS output filters control which servers are
included in the GNS responses sent by the router. GNS supports output filters only.
included in the GNS responses sent by the router. GNS supports output filters only.
ipx filter [vlan] gns {all | gns_type} out {allow | block} [network_number [mask network_mask]
[network_node [mask node_mask]]]
[network_node [mask node_mask]]]
no ipx filter [vlan] gns {all | gns_type} out {allow | block} [network_number [mask network_mask]
[network_node [mask node_mask]]]
[network_node [mask node_mask]]]
Syntax Definitions
vlan
To apply the filter to a specific VLAN or delete a filter from a specific
VLAN, enter the VLAN number.
VLAN, enter the VLAN number.
all
Enter all to include all GNS filters.
gns_type
To configure a specific SAP filter, enter the 4-digit hex GNS filter type
as defined by NetWare.
as defined by NetWare.
out
Optional command syntax. GNS supports output filters only.
allow
Allows the traffic specified in the filter.
block
Blocks the traffic specified in the filter.
network_number
To apply the filter to a specific network or delete a filter from a specific
network, enter the IPX network number.
network, enter the IPX network number.
network_mask
If you are configuring a specific network, enter the network mask.
network_node
To apply the filter to a specific network node or delete a filter from a
specific network node, enter the network node number. (You must also
enter a network number and network mask as described above.)
specific network node, enter the network node number. (You must also
enter a network number and network mask as described above.)
node_mask
If you are configuring a specific node, enter the node mask.
Defaults
parameter
default
vlan
0
allow | block
allow
network_number
00000000
network_mask
ffffffff
network_node
00:00:00:00:00:00
node_mask
00:00:00:00:00:00