Franklin adv-2002 Mode D'Emploi
16
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning: Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting your BOOKMAN
erases settings and information en-
tered into its built-in book, and in any
currently installed book cards.
Warning: Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting your BOOKMAN
erases settings and information en-
tered into its built-in book, and in any
currently installed book cards.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on your BOOKMAN.
Read its User’s Guide to find the
location of the reset button.
sized hole on your BOOKMAN.
Read its User’s Guide to find the
location of the reset button.
Optional Features
AC adaptor jack: Some BOOK-
MAN models are equipped with a
standard 3.5 mm jack for use with a 9-
volt, 200-300 milliamp AC/DC adaptor.
MAN models are equipped with a
standard 3.5 mm jack for use with a 9-
volt, 200-300 milliamp AC/DC adaptor.
This symbol indicates that the inner
core of the plug of an AC adaptor is
negative and that the outer part of the
plug is positive. If your AC/DC adap-
tor does not have this symbol, confirm
its compatibility at its place of pur-
chase.
core of the plug of an AC adaptor is
negative and that the outer part of the
plug is positive. If your AC/DC adap-
tor does not have this symbol, confirm
its compatibility at its place of pur-
chase.
Headphone jack: Some BOOK-
MAN models also have a 3.5 mm ste-
reo headphone jack for use with a
standard impedance 8 Ohm headset.
MAN models also have a 3.5 mm ste-
reo headphone jack for use with a
standard impedance 8 Ohm headset.
Headphone
jack
AC adaptor
jack
This unit may change operating modes due to
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key,
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key,
ON/OFF
, or by removing/replacing batteries.