Fujitsu n100 Manuel D’Utilisation
Troubleshooting and tips
The Pocket PC does not start after switch on
Cause
Troubleshooting
The battery is dead
►
Connect the power adapter to the Pocket PC to
charge the battery.
charge the battery.
The battery is charging. The power-on indicator lights up
red.
red.
The mains adapter is not connected
correctly.
correctly.
►
Switch the Pocket PC off.
►
Check whether the mains adapter is properly
connected to the Pocket PC and the electrical outlet.
connected to the Pocket PC and the electrical outlet.
►
Then switch the Pocket PC on again
The Pocket PC stops working
Cause
Troubleshooting
An application program has caused
the fault.
the fault.
►
or
►
►
If the restart does not function, reset the Pocket PC
(see the section "Resetting the Pocket-PC (Cold
start)").
(see the section "Resetting the Pocket-PC (Cold
start)").
The battery is dead
►
Connect the power adapter to the Pocket PC to
charge the battery.
charge the battery.
The battery is charging. The power-on indicator lights up
red.
red.
The battery discharges too quickly
Cause
Troubleshooting
The battery is either too hot or too
cold.
cold.
►
Bring the Pocket PC up/down to a normal
temperature again.
temperature again.
If the operating time of the battery mode is extremely
short, the battery is probably old and should be replaced.
Please contact your dealer for a new battery.
short, the battery is probably old and should be replaced.
Please contact your dealer for a new battery.
36
A26391-K197-Z120-1-7619, Edition 1