Fujitsu 3500 Mode D'Emploi

Resuming System Operation 

2

To resume system operation, (from either Suspend-to-RAM or Save-to-Disk modes), 
press the Suspend/Resume button.

• From Suspend-to-RAM mode

Status lights indicate that the system state is changing. It may take up to a minute 
before the system returns to the On state and system operation resumes. Note that 
the display turns on shortly before the stylus becomes active due to the power-up 
sequences observed by the system.

• From Save-to-Disk mode

Active data is read from the hard disk drive, and the system returns to the On 
state after a short period of time.

Note that power to several system components must be restored before system 
operation resumes. Allow sufficient time for system operation to resume before 
attempting to use the system. If your system uses Save-to-Disk mode, it will take 
longer to resume operation as compared to using Suspend-to-RAM mode. Time is 
needed to read data from the hard disk drive. 

• Use the system as you normally would once system operation resumes. 

All programs resume at the point where execution stopped when system operation 
was suspended. 

Using the stylus

2

You can use the Stylistic 3500 stylus (also called a “pen”) to generate and create 
electronic “ink”, to select items, and to navigate through programs on the pen tablet. 
The stylus can be used like a two button mouse when used in conjunction with the 
right-mouse button hotpad. Programs which support handwriting recognition allow 
you to write characters directly on the screen with the stylus and then translate your 
printed text into keyboard-style input.

• Ensure that a screen protector is installed on the pen tablet 

screen before you use the stylus. The warranty does not 
cover a screen that is scratched as a result of not using a 
screen protector.

• Use only the stylus provided with your pen tablet. Do not use 

substitutes that were not designed for the Stylistic 3500.