Franklin scd-1870 Mode D'Emploi
Selecting a Book
Once a book card is installed in the unit, you
can select the book you want to use.
can select the book you want to use.
1. Turn your unit on.
2. Press CARD.
2. Press CARD.
Icons appear for each available book.
The
built-in book is highlighted.
3. Press
or
to highlight your selection.
4. Press ENTER to select it.
5. Press CARD to return to the Card menu.
5. Press CARD to return to the Card menu.
✓
BOOKMAN Card Troubleshooting
Make sure your book card is installed correctly. If your
card is performing erratically, follow the reset
instructions in “Resetting Your Unit” on page 71. If this
does not fix the problem, remove the card and then
remove the white rubber strip located between the two
metal pins. Clean the rubber strip with your fingers and
then replace it making sure it is completely in its notch.
card is performing erratically, follow the reset
instructions in “Resetting Your Unit” on page 71. If this
does not fix the problem, remove the card and then
remove the white rubber strip located between the two
metal pins. Clean the rubber strip with your fingers and
then replace it making sure it is completely in its notch.
14