British Telecom Stratus 1500 trio 41393 Manuel D’Utilisation

If you experience any problems, please call the Helpline on 0808 100 6556*

51

The handset is automatically assigned the next 

available handset number.
If registration is not successful first time, please 

repeat the process again in case the base 

registration period ran out of time.
If there are already 5 handsets registered to the 

base, the registration will fail. The display shows 
too MAny hAnDSetS.
You must de-register another handset before you 

can register the new one.
If your BT Stratus 1500 handset is registered to 

more than one base, you can select which base 

to use.
If you have a handset registered to more than one 

base and then de-register it from one of them you 

will need to re-select which base to use.
Until the base is selected the handset will  

display regiSter.

You can use up to five DECT compatible handsets with your BT Stratus 1500 base 
to extend your phone system without needing to install extension sockets for each 
new phone.

If you have purchased a BT Stratus 1500 multiple pack any additional handsets 
come pre-registered to the base.

If you have purchased a DECT compatible handset separately you must register it 
to your BT Stratus 1500 base before it can be used, following the instructions that 
come with the new handset.

Handset registration

At the base:

1.  Press and hold 

 for approximately 5 seconds until you hear a beep. 

You now have 2 minutes to register the handset.

For a Stratus handset:

1.  Press 

Menu

, scroll 

 or 

 to 

ADvAnCeD

 

Set

 and  

press 

SeleCt

.

2.  Scroll 

 to 

regiStrAtion

, press 

SeleCt

. 

3.  Enter the system PIN (default setting 0000) and press 

ok

. The handset will 

search for the base and then display 

regiStering

. When registration is 

complete you hear a long confirmation beep and the handset will be allocated 
the next available handset number.

Using additional handsets