RCA L22HD32D Mode D'Emploi

300-75 ohm Matching

Transformer

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your

antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300

ohm twin-lead wire, the use of the 300-75 ohm

matching transformer may be necessary.

Connect the UHF 300 ohm twin-lead wire to

the Combiner (not supplied). Connect the VHF

300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer. Attach the Transformer to

the Combiner, then attach the Combiner to the

Antenna Jack.

Connect the VHF 75 ohm cable and UHF 300 ohm

twin-lead wire to the Combiner (not supplied). Attach

the Combiner to the Antenna Jack.

300-75 ohm Matching Transformer

UHF 300 ohm

VHF 300 ohm

Antenna

Jack

Combiner

VHF 75 ohm

Antenna

Jack

Antenna

Jack

75 ohm Coaxial

Cable

Antenna

Jack

Combiner

UHF 300 ohm

IMPORTANT: Go to page 15 to choose the signal and search for channels.

51H0101A_eng.indd 13

2/26/08 9:47:36 AM