RCA drd440re Mode D'Emploi
Do not stack electronic components or other objects on top of
the Digital Satellite Receiver.
the Digital Satellite Receiver.
The slots on top of the receiver must be
left uncovered to allow proper airflow to the unit. Blocking the airflow
to the unit could impair performance or damage your receiver and other
components.
to the unit could impair performance or damage your receiver and other
components.
Do not stack the digital satellite receiver on top of a “hot component”
such as an audio power amplifier.
such as an audio power amplifier.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.
equipment may void the user’s authority to operate it.
Note to Cable TV Installer:
This reminder is provided to call your attention to article 820-40 of the
National Electrical Code (Section 54 of the Canadian Electrical Code, Part
1) which provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
National Electrical Code (Section 54 of the Canadian Electrical Code, Part
1) which provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Note to Satellite Dish Installer:
This reminder is provided to call your attention to articles 810 and 820 of
the 1999 National Electrical Code. Refer to article 810, in particular to
810-1 and 810-15, for required grounding of the metal structure of the
Dish Antenna. Refer also to the 810-2 which, by reference to article 820,
requires that the satellite dish coaxial cable shield be connected to the
grounding system of the building as close to the point of cable entry as
practical.
the 1999 National Electrical Code. Refer to article 810, in particular to
810-1 and 810-15, for required grounding of the metal structure of the
Dish Antenna. Refer also to the 810-2 which, by reference to article 820,
requires that the satellite dish coaxial cable shield be connected to the
grounding system of the building as close to the point of cable entry as
practical.
IMPORTANT NOTICE:
This device incorporates an anticopy process technology that is protected
by U.S. patents and other intellectual property rights. The anticopy
process is licensed for non-commercial, home use only. Reverse
engineering or disassembly is prohibited.
by U.S. patents and other intellectual property rights. The anticopy
process is licensed for non-commercial, home use only. Reverse
engineering or disassembly is prohibited.
Care and Cleaning:
Use a soft cloth or dusting attachment of your vacuum cleaner to dust
your
your
digital satellite receiver. Remove dust from the ventilation holes on
the top and bottom.
Plastic surfaces are easily scratched and can be marred by alcohol and
various solvents. Avoid excessive use of oil-based furniture polishes since
the materials used in the cabinet will accumulate more dust. A non-
abrasive, anti-static cleaner/polisher is recommended.
various solvents. Avoid excessive use of oil-based furniture polishes since
the materials used in the cabinet will accumulate more dust. A non-
abrasive, anti-static cleaner/polisher is recommended.
Product
Registration
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the digital satellite receiver.
numbers in case you need them. The numbers are located on the back of the digital satellite receiver.
Model No.
_________________________________________________________
Serial No.
_________________________________________________________
Purchase Date:
________________________________________________
Dealer/Address/Phone:
___________________________________________________________________________________
Safety Information
Cautions
W A R N I N G
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates
“dangerous voltage” inside the
product that presents a risk of
electric shock or personal injury.
This symbol indicates
important instructions
accompanying the product.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
To reduce risk of fire
or shock hazard, do
not expose this
receiver to rain or
moisture.
or shock hazard, do
not expose this
receiver to rain or
moisture.