Printronix P5000LJ Guide D’Exploitation
Form Feed
167
Form Feed
ASCII Code FF
Hex Code
0C
Dec Code
12
Purpose
Prints the data in the buffer, if any, then moves the paper to the
top of the next form.
top of the next form.
Discussion The logical print head moves to the left margin. This code
cancels all one-line-only emphasis and font controls: double-
wide from SO and ESC SO, and unidirectional printing from ESC
<.
wide from SO and ESC SO, and unidirectional printing from ESC
<.
Graphics, Standard Density
ASCII Code ESC K
n1 n2
Hex Code
1B 4B
n1 n2
Dec Code
27 75
n1 n2
Purpose
Selects normal density bit image graphics of 60 dots per inch
horizontally and 72 dots per inch vertically.
horizontally and 72 dots per inch vertically.
where
(
n1 + 256n2) defines the number of data bytes to follow.
DATA = ASCII characters for the dot pattern bytes.
n1 = (Number of DATA bytes) - 256(n2)
(remainder of division of number of DATA bytes by 256,
sometimes referred to as MOD 256)
n2 = (Number of DATA bytes) / 256 (quotient of division)
n1 = (Number of DATA bytes) - 256(n2)
(remainder of division of number of DATA bytes by 256,
sometimes referred to as MOD 256)
n2 = (Number of DATA bytes) / 256 (quotient of division)
Discussion You can change graphics density with the ESC ? command.
Example
The following example produces a pattern of standard density bit
image graphics. The 9 data-bit pattern is repeated 27 times.
Compare this example to the double density and quadruple
density examples.
image graphics. The 9 data-bit pattern is repeated 27 times.
Compare this example to the double density and quadruple
density examples.