Printronix l7032 Guide D’Installation Rapide
Remove the Orange Tape Strips
18
6.
Lift the OPC module out of the printer using the white plastic
handle on top of the module. See Figure 12.
handle on top of the module. See Figure 12.
CAUTION
Do not touch the OPC drum. Touching the OPC drum can
contaminate the surface and degrade the print quality.
contaminate the surface and degrade the print quality.
Figure 12. Removing the OPC Module
7.
Set the OPC module on a clean, flat surface. Cover the OPC
module with an opaque covering so that no light can reach the
OPC drum. Use any convenient opaque covering, such as a
cardboard box, a large sheet of paper, or a large cloth.
module with an opaque covering so that no light can reach the
OPC drum. Use any convenient opaque covering, such as a
cardboard box, a large sheet of paper, or a large cloth.
8.
Remove the two orange tape strips holding the waste toner
bottle and transfer charger unit in place:
bottle and transfer charger unit in place:
•
One piece of tape holds both the waste toner bottle and the
transfer charger unit to the printer's front frame.
transfer charger unit to the printer's front frame.