Printronix L5035 Instruction De Maintenance
Chapter 2
Using The Control Panel
48
PAGE EJECT Key
IMPORTANT
Do not press PAGE EJECT while JOB IN PROCESS is flashing,
or your print job might become misaligned.
or your print job might become misaligned.
The PAGE EJECT key performs the following functions when the
printer is online:
printer is online:
When the JOB IN PROCESS status indicator lights
steadily,
pressing PAGE EJECT causes the printer to print all data in the
printer. If continuous form paper is used, the page then will be cut
at the perforation (unless the Burst On Eject option is disabled).
printer. If continuous form paper is used, the page then will be cut
at the perforation (unless the Burst On Eject option is disabled).
When the JOB IN PROCESS status indicator
flashes, pressing
PAGE EJECT causes the printer to attempt to print any data in the
buffer. The paper motion caused by the page eject operation may
interrupt the printing of data that is not currently in the buffer. Once
the paper motion has occurred, the data that was not yet in the
buffer should print. If continuous form paper is used, the page then
will be cut at the perforation (unless the Burst On Eject option is
disabled).
buffer. The paper motion caused by the page eject operation may
interrupt the printing of data that is not currently in the buffer. Once
the paper motion has occurred, the data that was not yet in the
buffer should print. If continuous form paper is used, the page then
will be cut at the perforation (unless the Burst On Eject option is
disabled).
To start downloading files to the printer, press the PAGE EJECT +
ONLINE key. See Chapter 3 in the
ONLINE key. See Chapter 3 in the
User’s Manual for more
information.
When the JOB IN PROCESS status indicator is not lit or flashing,
PAGE EJECT has no effect.
PAGE EJECT has no effect.
Pressing the SHIFT + PAGE EJECT keys together moves the
paper one paper length without printing or cutting the paper. This
function is intended to be used with fanfold paper only. It can be
used to feed the paper into (customer-supplied) postprocessing
equipment.
paper one paper length without printing or cutting the paper. This
function is intended to be used with fanfold paper only. It can be
used to feed the paper into (customer-supplied) postprocessing
equipment.