HTC arrive Mode D'Emploi

3.

Tap the 

On/Off

 switch to turn Wi-Fi on.

Your device will then scan for available wireless 
networks and  display them. You will see the 
network names, type of security (open or secure 
network), and signal strength of the detected 
networks.

4.

Tap a wireless network to connect. If you selected 
an open network, you will be automatically 
connected to the network. If you selected a 
network that is secured with WEP, enter the 
password, and tap 

done

. 

When your device is connected to a wireless network, 
the Wi-Fi icon (

) appears for a brief moment on the 

status bar and tells you the approximate signal strength 
(number of bands displayed). When the Wi-Fi icon 
disappears, simply tap the status bar to display the 
icon again so you can see the current signal strength.

The next time your device connects to a previously 
accessed secured wireless network, you will not be 
prompted to enter the password or other security 
information again, unless you reset your device to its 
factory default settings.

1.

On the Start screen, tap 

.

2.

Tap 

Settings > Wi-Fi

. 

3.

Detected wireless networks are displayed on the 
Wi-Fi settings screen. Tap another wireless network 
to connect to it.

With your Sprint service, you are ready to start enjoying 
the advantages of data services. This section will help 
you learn the basics of using your data services, 
including launching a data connection.

Depending on the network type and its security 
settings, you may also need to enter more information.

You cannot manually add a Wi-Fi profile.