HTC pure Mode D'Emploi

Getting Started  9

After installing your SIM card and battery and charging the battery, you can now 

power on and start using your device.

Press the END/POWER button.
When you turn on your device for the first time, Windows Mobile starts up and 

prepares your device for first time use. When the preparation process is complete, 

the subsequent screen prompts you to choose whether to import SIM contacts to 

your device. See “Importing SIM contacts” in this chapter for details.

If the display is off, press the END/POWER button to turn the display back on.
Press and hold the END/POWER button for a few seconds.
Tap Yes when prompted.

When you turn on your phone for the first time or you change to another SIM card, 

the SIM Card Changed screen appears. Follow the on-screen instructions to import 

the contacts to your device.

Briefly press the POWER button to turn off the display temporarily and switch your 

device to Sleep mode. Sleep mode suspends your device to a low power state 

while the display is off in order to save battery power.
Your device automatically goes into Sleep mode when you leave the device idle 

after a certain period of time. You are still able to receive messages and calls while 

your device is in Sleep mode. Your device wakes up automatically when you receive 

an incoming call. To wake up your device manually, briefly press the POWER button.

Tip 

You can set the display timeout period. For instructions, see “To automatically turn off 

the screen backlight when the phone is not in use” in Chapter 1.