Equator ez1710 v Manuel Du Propriétaire

Page de 23
 
 
 
Combo Washer- Dryer Owner’s Manual 
 
INSTALLATION 
 
UNPACKING, LEVELING, & POSITIONING 
 
Remove the packing and check that the Washer-Dryer is undamaged. If you have any doubt, 
do not use the Washer-Dryer and call Equator Customer Service. Keep all packing parts 
(plastic bag, foam rubber, screws, etc.) out of the reach of children since they could be 
dangerous. 
 
Important: The inside of the Washer-Dryer consists of a free floating drum that is affixed 
with shipping bolts at the back of the cabinet (Fig.1) during transport. Before starting the 
machine, remember to remove the shipping bolts. To prevent water spray from entering the 
machine, remember to close the holes left open by the bolts with the plastic caps provided in 
the packet containing the Owner’s Manual. 
 
It is important for the machine to be perfectly level. For this reason, the machine is fitted with 
adjustable feet used for leveling the machine before use (Fig.2). 
 
In the case of flooring with carpeting, remember to check that there is sufficient 
ventilation around the machine.
   
 
              (Fig.1)                               (Fig.2) 
 
 
ELECTRICAL CONNECTION 
 
Connect the plug to a power outlet – 110V/60Hz with minimum 15 Amps. Make sure that the 
voltage and frequency available correspond with those stated on the serial number plate 
located on the machine. Do not use adaptors or extension cords since they could result in 
overheating and burn out.