Toshiba DX735-D3330 Mode D'Emploi

38

Replace the memory module slot cover and secure it using the 
screw.

Always make sure your computer and AC adaptor have adequate 
ventilation and are protected from overheating when the power is turned 
on or when an AC adaptor is connected to a power outlet (even if your 
computer is in Sleep mode). In this condition, observe the following:

 ❖

Never cover your computer or AC adaptor with any object.

 ❖

Never place your computer or AC adaptor near a heat source, 
such as an electric blanket or heater.

 ❖

Never cover or block the air vents including those located on the 
back of the computer.

 ❖

Always operate your computer on a hard flat surface.

Overheating your computer or AC adaptor could cause system 
failure, computer or AC adaptor damage or a fire, possibly resulting 
in serious injury.

Reconnect the cables.

Restart the computer.

TECHNICAL NOTE: You must have at least one memory module 
installed for the computer to work.

When you add or remove a memory module, you can check that the 
computer has recognized the change. To do this:

❖

Click Start, Control Panel, System and Security, and then 
System.

The System window appears. Installed memory (RAM) is 
displayed below the System heading.

If the computer does not recognize the memory configuration, turn 
off the computer and remove the memory module slot cover 
(complete steps 

 in 

), 

and then check that the module is inserted completely into the 
socket and lined up squarely with the socket latches.