Toshiba DMF102XKU Mode D'Emploi
M
EDIA
F
RAME
O
VERVIEW
17
USING
THE
REMOTE
CONTROL
■
Preparing the Remote
Control
Remove the transparent slip (as
illustrated) before using the remote
control.
Transparent Slip
■
Operating with the Remote
Control
Point the remote control at the remote
sensor and press the buttons.
Within about 5 m (16 feet)
MODE
MENU
BACK
ENTER
22.5
22.5
Distance: About 5 m (16 feet) from the
front of the remote sensor.
Angle: About 22.5° in each direction of
Angle: About 22.5° in each direction of
the front of the remote sensor.
Do not expose the remote sensor of
the Digital Media Frame to a strong
light source such as direct sunlight. If
you do, you may not be able to operate
the Digital Media Frame via the remote
control.
•
Do not drop or give the remote
control a shock.
•
Do not leave the remote control near
an extremely hot or humid place.
•
Do not spill water or put anything wet
on the remote control.
•
Do not disassemble the remote
control.
•
If the remote control does not func-
tion correctly or if the operating range
becomes reduced, replace the battery
with new one.
•
Inserting a battery other than the
specified one or an object may damage
the remote control.
■
Replacing the Remote Con-
trol Battery
Insert the specifi ed battery into the
remote control. (*Please see page 4 for
safe use of coin-shaped batteries.)
1
Push the battery compartment lid
slightly in the direction illustrated.
2
Gently insert a fingernail in groove.
3
Pull out the holder in the direction
illustrated. (*Take care not to break your
fingernail.)
PUSH
OPEN