Toshiba DMF102XKU Mode D'Emploi

21

Connect a USB memory device 

(e.g. USB thumb drive (U3 system not 

supported), digital camera [with USB 

mass storage function] or USB card 

reader) directly as illustrated, or use a 

USB cable for the connection. (to USB 

Port)

NOTE
♦ Multiple-port USB hub is not sup-

ported by the Digital Media Frame.
♦ Multiple-slot USB card reader is 

supported by the Digital Media Frame. 

You can insert up to fi ve memory cards 

to the connected card reader. The 

memory card(s) will be listed as USB 

1-5 respectively. (*Depending on the 

type of card reader used.)
♦ The Digital Media Frame may not 

support connection with all types of 

USB memory devices.
♦ You can switch to another memory 

card connected via a USB-based card 

reader using the Menu. For details, 

please refer to the section: 

Selecting Devices. (Refer to page 53)

♦ For details on how to use your USB 

memory device, please refer to the 

owner’s manual for the USB memory 

device.
♦ Do not remove the memory card/USB 

memory device while the Digital Media 

Frame is writing or deleting data. 

Data saved on the memory card/USB 

memory device may be lost.

For details, please refer to the section: 

to A Computer. (Refer to page 34)

Connect the headphones (not 

supplied) equipped with the stereo mini 

plug to the headphone jack.

When headphones are plugged 

to the Digital Media Frame, there will 

be no sound transmitted through the 

speakers.

CAUTION
♦ When you use headphones, keep the 

volume at a moderate level. If you use 

the headphones continuously with high 

volume sound, it may cause hearing 

damage.