Toshiba DMF102XKU Mode D'Emploi

6

● Do not use volatile liquids, such as insect 

spray, near the digital media frame. Do not 

leave rubber or plastic products in contact 

with the digital media frame for a long time. 

They will leave marks on the finish.
● When the digital media frame is not in use, 

be sure to turn off the power.
● If you do not use the digital media frame 

for a long period, the unit may not function 

properly in the future. Turn on and use the 

digital media frame occasionally.

● When you place this digital media frame 

near a TV, radio, or VCR, the playback picture 

may become poor and the sound may be 

distorted. In this case, move the digital media 

frame away from the TV, radio, or VCR.

● Use a soft, dry cloth for cleaning. Do not 

use any type of solvent, such as thinner and 

benzine, as they may damage the surface of 

the digital media frame.
● When cleaning the LCD screen, use a soft, 

dry cloth.

following carefully. 
Moisture condensation occurs, for example, 

when you pour a cold drink into a glass on a 

warm day. Drops of water form on the outside 

of the glass. In the same way, moisture may 

condense on the internal parts of the digital 

media frame.
● Moisture condensation occurs during the 

following cases.
- When you transport the digital media frame 

directly from a cold place to a warm place. 
- When you use the digital media frame in a 

room where you just turned on the heater, 

or a place where the cold air from the air 

conditioner directly hits the unit. 
- In summer, when you use the digital media 

frame in a hot and humid place just after you 

move the unit from an air conditioned room. 
- When you use the digital media frame in a 

humid place.

● Do not use the digital media frame when 

moisture condensation may occur. 
If you use the digital media frame in such 

a situation, it may damage memory cards 

and internal parts. Remove the memory 

cards, connect the AC adaptor, turn on the 

digital media frame, and leave it for two or 

three hours. After two or three hours, the 

digital media frame will have warmed up and 

evaporated any moisture.

● The contents in the memory storage 

(internal memory, memory card, USB memory 

device) cannot be guaranteed regardless of 

the cause of damage or failure.
● Please note that data in the internal 

memory may be deleted when repairing or 

checking the Digital Media Frame.

Wireless Interoperability
This product is designed to be interoperable 

with any wireless LAN product that is based 

on Direct Sequence Spread Spectrum 

(DSSS)/Orthogonal Frequency Division 

Multiplexing(OFDM) radio technology, and is 

compliant to: 
■ The IEEE 802.11 Standard on Wireless 

LANs (Revision B/G), as defined and 

approved by the Institute of Electrical and 

Electronics Engineers. 
■ The Wireless Fidelity (Wi-Fi) certification 

as defined by the Wi-Fi Alliance. The “Wi-Fi 

CERTIFIED” logo is a certification mark of the 

Wi-Fi Alliance.

CAUTION
Bluetooth® and Wireless LAN devices oper-

ate within the same radio frequency range 

and may interfere with one another. If you use 

Bluetooth and Wireless LAN devices simul-

taneously, you may occasionally experience 

a less than optimal network performance or 

even lose your network connection.
If you should experience any such problem, 

immediately turn off either one of your 

Bluetooth or Wireless LAN.