Toshiba M30 Mode D'Emploi
Power
Satellite M30 Series
6-16
Satellite M30 Series
Version
1
Last Saved on 08.09.2003 19:55
ENGLISH using Mies10 Online.dot –– Printed on 10.09.2003 as
BIOS password window
2. Follow the on-screen prompts to enter the password.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
shuts off. In this case, you must turn the computer back on to retry
password entry.
Power-up modes
The computer has the following power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Standby: Data is maintained in the computer’s main memory.
Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started.
in Chapter 3, Getting Started.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hot keys
You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to
enter Hibernation. See Chapter 5, The Keyboard for details.
enter Hibernation. See Chapter 5, The Keyboard for details.
Panel power on/off
You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Standby or Hibernation mode but not in boot mode.
you close the display panel. When you open the panel, power turns on in
Standby or Hibernation mode but not in boot mode.
completed.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
Windows, do not close the display until the shut down function is