Toshiba M30 Mode D'Emploi
Optional Devices
Satellite M30 Series
8-7
Satellite M30 Series
Version
1
Last Saved on 10.09.2003 10:03
ENGLISH using Mies10 Online.dot –– Printed on 10.09.2003 as
Removing the memory module cover
5. Fit the memory module’s connectors into the socket at about a
45 degree angle and push the module down until latches on either
side snap into place.
side snap into place.
Seating the memory module
Be careful not to drop the screw inside the computer.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
Debris on the connectors may cause memory access problems.
6. Seat the memory module cover and secure it with one screw.
7. Install the battery pack. Refer to Replacing the battery pack section in
Chapter 6, Power, for details.
8. Turn the power on and make sure the added memory is recognized.
Open System Properties in the Control Panel and click the General
tab.
tab.
SCREW
MEMORY MODULE COVER