Toshiba 27a35c Mode D'Emploi
13
Appendix
Using the
TV’
s
Features
Setting up
y
our TV
Using the
Remote Contr
ol
Connecting
y
our TV
W
elcome to
T
oshiba
Impor
tant
Saf
eguar
ds
Adding channels to the TV’s memory
When you press CH +/- on the remote control or CHANNEL
▼/▲ on
the TV front panel, your TV will stop only on the channels stored in the
TV’s channel memory. Follow the steps below to program channels into
the memory.
TV’s channel memory. Follow the steps below to program channels into
the memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press
2. Press
or
until the TV/
CABLE selection is highlighted.
3. Press or to highlight either TV
or CABLE, depending on which
you use.
you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
If you use cable, choose CABLE.
4. Press
to select CH PROGRAM.
5. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
Channel Number buttons.
2. Press MENU, then press or
to display the SETUP menu.
3. Press
or
to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press CHANNEL
▲/ ▼
on the TV front panel or CH +/– on the
remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
control.
For example, to select channel 125, press 100, 2, 5.
Menu
PICTURE AUDIO
SETUP
OPTION
CH
CH PROGRAM
ADD / ERASE
START
ADD
SELECT
ADJUST
TV / CABLE
TV CABLE
PICTURE AUDIO
SETUP
OPTION
CH
CH PROGRAM
START
SELECT
ADJUST
TV / CABLE
CABLE
ADD / ERASE
ADD ERASE
Channel +/–
Channel
Numbers
Numbers
Setting up
your TV
3U50101A(E)_P07-13
3/31/05, 6:18 PM
13