Toshiba 27a41 Mode D'Emploi
12
Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory, you
can erase channels or add your favorite channels.
its memory. After the TV has stored the channels in its memory, you
can erase channels or add your favorite channels.
To add channels:
1. Press MENU, then press or to display the SET UP menu.
2. Press
2. Press
▲
or
▼
until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
If you use cable, choose CABLE.
4. Press
▼
to select CH PROGRAM.
5. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW PLEASE WAIT” appears and count up
the received channel.
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW PLEASE WAIT” appears and count up
the received channel.
6. When channel programming is complete, the message “COMPLETED
(channel or cable number)” appears.
7. Press Channel
▲
or
▼
to view the programmed channels.
Adding and erasing channels manually
After you’ve programmed the channels, you can add or erase specific
channels.
channels.
To add or erase channels:
1. Select the channel you want to add or erase using Channel + or –.
If adding channels, you must select the channel to add by using the
Channel Number buttons.
Channel Number buttons.
2. Press MENU, then press or
to display the SET UP menu.
3. Press
▲
or
▼
to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel + or – on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
Setting up
your TV
PICTURE AUDIO
SET UP
OPTION
CH
CH PROGRAM
ADD / ERASE
START
ADD
SELECT
ADJUST
TV / CABLE
TV CABLE
PICTURE AUDIO
SET UP
OPTION
CH
CH PROGRAM
START
SELECT
ADJUST
TV / CABLE
TV
ADD / ERASE
ADD ERASE
POWER
1
2
3
4
5
6
7
8
9
0
TV
VCR
CABLE
CH RTN
ENT
100
CH +
CH –
FAV
EXIT
RECALL TV/VIDEO
CODE
MTS
SLEEP
MUTE
RESET CAP/TEXT
1/2
MENU/
ENTER
VOL
FAV
VOL
+
–
Menu
Exit
Channel +/–
POWER
1
2
3
4
5
6
7
8
9
0
TV
VCR
CABLE
CH RTN
ENT
100
CH +
CH –
FAV
EXIT
RECALL TV/VIDEO
CODE
MTS
SLEEP
MUTE
RESET CAP/TEXT
1/2
MENU/
ENTER
VOL
FAV
VOL
+
–
Menu
Exit
Channel
Numbers
Numbers
Channel +/–
3K10601B P12-21
21/08/2001, 14:27
12