Toshiba 40rf350 Mode D'Emploi
12
RF350U (E/F) Web 213:276
Chapter 1: Introduction
TV back panel connections
For an explanation of cable types and connections, see pages 13–22.
4
5
2
3
1
7
8
9
6
10
TV back
Cable Clamper
Power cord
1
IR OUT — For controlling infrared remote-controlled
devices through the TV. You can connect up to two
devices with an optical IR blaster cable (- page 13), and
then control the devices using the TV’s IR pass-through
features.
devices through the TV. You can connect up to two
devices with an optical IR blaster cable (- page 13), and
then control the devices using the TV’s IR pass-through
features.
2
ColorStream
®
HD-1 and ColorStream
®
HD-2 —
Two sets of ColorStream
®
high-definition component
video inputs (with standard stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
®
.
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
information; separate audio cables are required for a
complete connection.
3
VIDEO-1 IN — Standard (composite) video and standard
audio inputs plus optional S-video inputs for connecting
devices with composite video or S-video output.
audio inputs plus optional S-video inputs for connecting
devices with composite video or S-video output.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.
carry only video information; separate audio cables are
required for a complete connection.
4
Fixed Audio OUT — Analog audio outputs for
connecting an audio amplifier.
connecting an audio amplifier.
5
PC/HDMI-1 (AUDIO) IN — PC audio input terminals
are shared with HDMI-1 analog audio input terminals, and
their use can be configured in the Audio Setup menu
(- page 65).
are shared with HDMI-1 analog audio input terminals, and
their use can be configured in the Audio Setup menu
(- page 65).
6
PC IN — For use when connecting a personal computer.
7
ANT — Antenna input that supports analog (NTSC) and
digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.
digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.
8
Digital Audio OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
9
HDMI
™
IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital
video from an HDMI device or uncompressed digital
video from a DVI device. Also see item 5. HDMI
connection is necessary to receive 1080p signals.
video from an HDMI device or uncompressed digital
video from a DVI device. Also see item 5. HDMI
connection is necessary to receive 1080p signals.
10 Service port — For service use only. Used for updating
the television’s firmware.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
40RF350U_EN.book Page 12 Thursday, July 5, 2007 5:42 PM