Toshiba 50hp82 Manuel Du Propriétaire
19
FULL size screen
The image is expanded in the horizontal and vertical
direction.
direction.
TRUE
The image is true resolution.
FULL
Information
Supported resolution
See page 45 for details on the display output of the
various VESA signal standards supported by the display.
various VESA signal standards supported by the display.
“PICTURE SIZE” setting
When the setting of “PICTURE SIZE” is OFF, the size
of RGB-input pictures will be TRUE in place of
NORMAL.
of RGB-input pictures will be TRUE in place of
NORMAL.
When 852 (848) dot
480 line wide VGA*
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
horizontal frequency of 31.7 (31.0) kHz are in-
put
Select an appropriate setting for RGB SELECT mode
referring to the“Table of Signals Supported” on page
45.
referring to the“Table of Signals Supported” on page
45.
* “ IBM PC/AT” and “VGA” are registered trademarks
of IBM, Inc. of the United States.
Watching computer images with a
wide screen
wide screen
Switch to the wide screen mode to expand the 4:3 image
to fill the entire screen.
to fill the entire screen.
1. Press the WIDE button on the remote controller.
2. Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
The screen size switches as follows:
→
NORMAL
→
FULL
NORMAL size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer
image.
image.
FULL size screen
The image is expanded in the horizontal direction.
When wide signals are input.
FULL size screen
When “PICTURE SIZE” is set to “OFF”
The screen size switches as follows:
→
TRUE
→
FULL
TRUE size screen (VGA, SVGA 4:3)
The image is true resolution.