Toshiba 50hp82 Manuel Du Propriétaire

30

3. Adjust using the 

 and 

 buttons.

• If neither the 

 or 

 button is pressed within 5 seconds,

the current setting is set and the previous screen
reappears.

To continue making other computer image
adjustments ...
Repeat from step 2.

4. Once all adjustments are completed ...

Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.

When Auto Picture is off, the Fine Picture and the
Picture ADJ items are displayed so that you can adjust
them.

The position of the image can be adjusted and flickering
of the image can be corrected.

Example: Adjusting the vertical position in the normal
mode

1. Use the ▲ and ▼ buttons to select “SCREEN,” then

press the PROCEED button. The “SCREEN” menu
appears.

Default settings (when RGB/PC is selected)

• The settings on the SCREEN menu are not preset at the

factory.

To select a mode ...
Use the 

 and 

 buttons to select a mode.

The mode switches as follows when the 

 and 

buttons are pressed:

→

↔

←

• The mode can also be switched by pressing the “WIDE”

button on the remote controller.

2. To adjust the vertical position ...

Use the ▲ and ▼ buttons to select “V-POSITION”.