Toshiba mw20fn3 Manuel D’Utilisation
14
Connections
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CATV), see page 15 for Cable TV connections.
If you are using a cable TV service (CATV), see page 15 for Cable TV connections.
Connect the 75 ohm Cable from the Combination VHF/UHF
Antenna to the Antenna Jack.
Antenna to the Antenna Jack.
If your Combination VHF/UHF Antenna has a 300 ohm
Twin-lead Wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
Twin-lead Wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
Connect the VHF 75 ohm cable and UHF 300 ohm Twin-
lead Wire to the Combiner (not supplied). Attach the
Combiner to the Antenna Jack.
lead Wire to the Combiner (not supplied). Attach the
Combiner to the Antenna Jack.
Connect the UHF 300 ohm Twin-lead Wire to the
Combiner (not supplied). Connect the VHF 300 ohm
Twin-lead Wire to the 300-75 ohm Matching Trans-
former. Attach the Transformer to the Combiner, then
attach the Combiner to the Antenna Jack.
Combiner (not supplied). Connect the VHF 300 ohm
Twin-lead Wire to the 300-75 ohm Matching Trans-
former. Attach the Transformer to the Combiner, then
attach the Combiner to the Antenna Jack.
UHF 300 ohm
VHF 75 ohm
Antenna
Jack
Combiner
300-75 ohm
Matching
Transformer
Matching
Transformer
UHF 300 ohm
VHF 300 ohm
Antenna
Jack
Combiner
75 ohm
Coaxial
Cable
Coaxial
Cable
300-75 ohm
Matching
Transformer
Matching
Transformer
Antenna
Jack
Antenna
Jack
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)
5F10201C (E)p14-15
5/6/03, 16:50
14