Manualsbrain.com
  1. Manuels
  2. Marques
  3. Toshiba
  4. 32cv510
  5. Manuel D’Utilisation

Toshiba 32cv510 Manuel D’Utilisation

Télécharger
Page de 66
38
CV510U (E/F) Web 213:276
Chapter 6: Using the TV’s features
Switching between two channels using 
Channel Return
The Channel Return feature allows you to switch between two 
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number 
buttons (and the dash (
=) button if selecting a digital 
channel).
3
Press 
R on the remote control. The previous channel 
will display. Each time you press 
R, the TV will switch 
back and forth between the last two channels that were 
tuned.
Note: If you press 
R
 from a non-antenna input, the TV 
will return to the last-viewed input.
Switching between two channels using 
SurfLock
™
The SurfLock
™
 feature temporarily “memorizes” one channel 
to the 
R button, so you can return to that channel quickly 
from any other channel by pressing 
R. To memorize a 
channel to the 
R button:
1
Tune the TV to the channel you want to program into the 
R button.
2
Press and hold 
R for about 2 seconds until the message 
“Memorized” appears on-screen. The channel has been 
programmed to the 
R button.
3
You can then change channels repeatedly, and when you 
press 
R, the memorized channel will be tuned.
The TV will return to the memorized channel one time only. 
Once you press 
R and then change channels again, the CH 
RTN memory will be cleared and the button will function as 
Channel Return, by switching back and forth between the last 
two channels that are tuned.This feature also works for 
external inputs.
Selecting the picture size
You can view many program formats in a variety of picture 
sizes—Natural, TheaterWide 1, TheaterWide 2, 
TheaterWide 3, Full, 4:3 HD, Native and Dot by Dot.
Note: The “picture size” illustrations are examples only. The 
format of the image (in any of the picture sizes) will vary 
depending on the format of the signal you are currently 
watching. Select the picture size that displays the current 
program the way that looks best to you.
You can save separate picture size preferences for each input 
on your TV.
To select the picture size using the remote control:
1
Press 
I on the remote control.
2
While the Picture Size screen is open, you can do one of 
the following to select the desired picture size:
•
Repeatedly press 
I.
•
Press the corresponding Number button (0–6) while the 
Picture Size screen is open.
•
Press B or b while the Picture Size screen is open.
To select the picture size using the menus:
1
Select Picture Size in the Theater Settings menu.
2
Press C or c to select the desired picture size setting.
3
Highlight Done and press 
T.
Note: Some of the picture sizes may not be available 
depending on the receiving signal format (those will be 
“grayed out” in the Picture Size screen).
Note: If you select one of the TheaterWide
®
 picture sizes, the 
top and bottom edges of the picture (including subtitles or 
captions) may be hidden. To view the hidden edges, either 
scroll the picture (TheaterWide 2 and 3 only) or try viewing the 
program in Full or Natural picture size.
Using these functions to change the picture size (i.e., 
changing the height/ width ratio) for any purpose other than 
your private viewing may be prohibited under the Copyright 
Laws of the United States and other countries, and may 
subject you to civil and criminal liability.
32_37CV510U_EN.book  Page 38  Friday, February 22, 2008  5:40 PM