Toshiba mw27h62 Manuel Du Propriétaire
39
TV operation
Setting the digital setup (digital mode)
Selecting the audio language
Selecting the digital output format
When two or more audio languages are included in a
digital signal, you can select one of the audio languages.
digital signal, you can select one of the audio languages.
Press MENU in the digital mode, then press
or
or
to select
option.
1
Press
or
to select “DIGITAL SETUP”, then
press
.
2
Press
or
to select “AUDIO LANGUAGE”,
then press
.
3
Press
/
or Number buttons (0-7) to select
desired language, then press ENTER.
4
Press MENU repeatedly until the menu screen
is cleared.
is cleared.
5
Use this feature to select the digital audio output format
when you connect a Dolby Digital decoder or other digital
audio system to the coaxial digital audio output on the TV.
when you connect a Dolby Digital decoder or other digital
audio system to the coaxial digital audio output on the TV.
Follow the left steps 1-2.
1
Press
or
to select “DIGITAL OUTPUT”,
then press
or
to select PCM or DOLBY
DIGITAL.
2
Press MENU repeatedly until the menu screen
is cleared.
is cleared.
3
Checking the digital signal strength
You can check the strength of the digital signal by viewing
the digital signal meter.
the digital signal meter.
Follow the left steps 1-2.
1
Press
or
to select “SIGNAL METER”, then
press
to check the digital signal strength.
2
Press MENU repeatedly until the menu screen
is cleared.
is cleared.
3
/
/
/
MENU
0–7
ENTER
Notes:
• Signal meter feature is not available for analog channels.
• After approximately 4 minutes, SIGNAL METER screen will
• Signal meter feature is not available for analog channels.
• After approximately 4 minutes, SIGNAL METER screen will
return to normal TV-operation automatically.
• When you select a vacant channel, the signal meter may
react.
5V60101A [E]p30-39
2/22/06, 1:05 PM
39