Toshiba 46vx700u Mode D'Emploi
40
Chapter 6: Basic features
To set the REGZA-LINK
®
Setup:
1
Y > PREFERENCES > REGZA-LINK Setup >
.
2
Press B or b to highlight Enable REGZA-LINK.
3
Press C or c to select On.
Note:
If you set Enable REGZA-LINK to Off, the other
items under REGZA-LINK Setup will be grayed out.
4
Press B or b to select a REGZA-LINK setup item.
Press C or c to select On or the desired mode.
Press C or c to select On or the desired mode.
•
TV Auto Power: On/Off
•
Auto Standby: On/Off
•
Amplifier Control: On/Off
•
Speaker Preference: TV Speakers/Amplifier
Connecting a Toshiba PC
compatible to REGZA-LINK
compatible to REGZA-LINK
®
This feature automatically sets suitable widescreen
formats and picture preferences when the TV is
connected to a Toshiba PC compatible with REGZA-
LINK
formats and picture preferences when the TV is
connected to a Toshiba PC compatible with REGZA-
LINK
®
.
Note:
This feature depends on the equipment connected.
Using the HDMI
®
settings feature
Note:
If some HDMI legacy sources do not work properly
with your HDMI TV, set the following options (Content Type
and INSTAPORT
and INSTAPORT
™
) to Off. Adjusting these settings should
allow your HDMI legacy source to operate properly with
your TV.
your TV.
The HDMI settings (Content Type and RGB Range)
need proper HDMI source devices. If your HDMI
source device does not support these features, the TV
may not work properly when these features are
enabled.
need proper HDMI source devices. If your HDMI
source device does not support these features, the TV
may not work properly when these features are
enabled.
Note:
If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 60 Hz, you
will need a High Speed HDMI
will need a High Speed HDMI
®
cable. Conventional HDMI/
DVI cables may not work properly with this mode.
1
Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, HDMI 3, or HDMI 4).
HDMI 2, HDMI 3, or HDMI 4).
2
Y > PREFERENCES > AV Connection > .
3
Press B or b to select HDMI Settings.
4
Press B or b to select an item.
5
Press C or c to select a setting.
O K
Mode (default setting) Description
Enable Content
Type: On
Type: On
Adjusts the picture quality
automatically by the content of
“Contents type” included in the
HDMI input.
Note:
automatically by the content of
“Contents type” included in the
HDMI input.
Note:
When Picture Mode is set to
AutoView
, this feature is available.
INSTAPORT
™
: On
Reduces the lag time when
switching HDMI sources.
switching HDMI sources.
RGB Range: Auto
Adjusts RGB full range signal
automatically.
When Limited is selected, RGB
output signal is output in the range
from 16 to 235. When Full is
selected, RGB output signal is
output in the range from 0 to 255.
automatically.
When Limited is selected, RGB
output signal is output in the range
from 16 to 235. When Full is
selected, RGB output signal is
output in the range from 0 to 255.
O K
VX700U_EN.pdf 40
2010/08/11 9:27:56