Toshiba 46vx700u Mode D'Emploi
44
Chapter 6: Basic features
Displaying TV status information
To display TV status information:
Press .
The following information will display (if applicable):
•Current input (ANT/CABLE, Video, etc.)
•If ANT/CABLE is the current input, either “CABLE”
Press .
The following information will display (if applicable):
•Current input (ANT/CABLE, Video, etc.)
•If ANT/CABLE is the current input, either “CABLE”
(for cable TV) or “ANT” (for over-the-air broadcasts).
•Channel number (if in ANT/CABLE mode)
•Input label (if set)
•Digital signal strength indicator (bar graph in lower
•Input label (if set)
•Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)
•Stereo, Mono or SAP audio status (when HDMI input
mode, PCM)
•Video resolution
•Aspect ratio of incoming video signal (4:3 or 16:9)
•V-Chip rating status
•GameTimer (if set)
•Aspect ratio of incoming video signal (4:3 or 16:9)
•V-Chip rating status
•GameTimer (if set)
To close the screen:
Press
Press
again.
The following additional information (only available
for ANT/CABLE input) will display for off air digital
channels (if applicable):
•Title
•Duration
•Detailed description
for ANT/CABLE input) will display for off air digital
channels (if applicable):
•Title
•Duration
•Detailed description
To display next program information for digital
channels, press
channels, press
again. Pressing
a third time will
remove the entire banner.
Note:
The location of the banner can be moved to the top
or bottom of the screen by pressing B or b while the INFO
display is onscreen. The last position will be stored to
memory.
display is onscreen. The last position will be stored to
memory.
Viewing support information
1
Y > SETUP > System Information.
2
Press
to display support information containing
Web/Customer service numbers for US, Canada
and Mexico.
and Mexico.
Resetting to Factory Defaults
You can reset all settings and channels.
Note:
By upgrading, the factory default values may be
changed.
1
Y > SETUP > Reset TV > .
2
Enter your PIN code (if PIN code has been set).
3
A confirmation screen appears. Select Yes, and
press
press
. The TV will turn off automatically.
To cancel the reset:
Press C or c to select No. Press
Press C or c to select No. Press
.
Power failure
If the power is cut off while you are viewing the TV,
the Last Mode Memory feature automatically turns on
the TV when the power is restored.
the Last Mode Memory feature automatically turns on
the TV when the power is restored.
2-2
ANT
Nashville WX Channel
Nashville WX Channel provides Middle Tenessee and Southern Kentucky
weather.
8:59am - 4:59pm EST
480i
4:3
NONE
O K
O K
O K
O K
VX700U_EN.pdf 44
2010/08/11 9:27:57